Drive-On Benches


The UnoLiner CRS4600T-DO Bench is a drive-on chassis straightening bench with a lifting capacity of 4600 kg and a bench frame length of 4.6 meters. This chassis straightening and collision repair frame machine is perfectly suitable for cars of all sizes, crossovers, MPVs, SUVs, pickup trucks, all-terrain vehicles, and light commercial vehicles. Because of its unique two-way locking system, many accessories can be mounted on top of the frame as well as on its sides. For example, by placing bench adapters outfitted with chassis clamps on top, the side profiles remain fully available for attaching one or more pulling towers, greatly expanding the bench’s already noteworthy versatility.


  • Unique two-way locking system
  • Maximum versatility
  • 4.6 ton lifting capacity
  • Mechanical and hydraulic safety systems
  • Multiple-angle 10-ton pulling ability
  • Interchangeable UnoLiner accessories

Technical data

  • Bench frame length : 4610 mm
  • Bench frame width : 1160 mm
  • Min. bench height : 175 mm
  • Max. bench height : 1235 mm
  • Max. load weight : 4600 kg
  • Length incl. ramps : 5570 mm
  • Width incl. ramps : 2085 mm



The CRS4600T-DO Bench comes equipped with angled, one-meter-long R25TL Drive-On Ramps. Its total length, including ramps, is 5.6 meters. Its total width, including ramps, is just over 2 meters. The CRS4600T-DO set includes an F46T bench frame with an L36 Scissor Lift, 1x R25TL Drive-On Ramp Set, 4x C10 Quick Lock Chassis Clamp, 4x B10T Bench Adapters, 4x H25L Wheels Stands, 1x P10 Draw Aligner Pulling Tower, and 1x F1030 Bench Height Set.